Removing And Installing Cooler For Charge Air Cooling Circuit - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Engage radiator in charge air cooler. Ensure proper engage‐
ment by pulling.
– Install radiator cowl
– Connect coolant hose with plug-in connector
– Fill up with coolant ⇒ page 151
Specified torques
♦ ⇒ "4.1 Exploded view - radiator/radiator fans", page 178
4.4 Removing and installing cooler for
charge air cooling circuit
Special tools and workshop equipment required
♦ Drip tray for workshop hoist - VAS 6208-
♦ Wedge - 3409-
182
Rep. gr.19 - Cooling
⇒ page 187 .
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 179 .