Seat Leon 2013 Workshop Manual page 213

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1.1.2 Overview of fitting locations –engine, intake side
1 - Knock sensor 1 - G61-
❑ Exploded view
⇒ page 268
2 - Oil pressure switch for re‐
duced oil pressure - F378-
❑ Exploded view
⇒ page 143
3 - Fuel pressure sender -
G247-
❑ Exploded view
⇒ page 210
4 - Activated charcoal filter sol‐
enoid valve 1 - N80-
5 - Injectors
♦ Cylinder 1 injector - N30-
♦ Cylinder 2 injector - N31-
♦ Cylinder 3 injector - N32-
♦ Cylinder 4 injector - N33-
❑ Exploded view
⇒ page 210
6 - Fuel pressure regulating
valve - N276-
❑ In high-pressure pump
❑ Exploded view
⇒ page 245
7 - Engine speed sender -
G28-
❑ Exploded view
⇒ page 268
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
1. Injection system
207