León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Release fastener -arrow-, detach engine control unit - J623-
and place to one side.
– Remove engine control unit
– Remove nuts -arrows- and detach bracket -1-.
Note
Different types of brackets are fitted depending on version.
– Remove line guide -1- from its clips, slide upwards
-in direction of arrow- and secure on one side.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Depending on version, unscrew and remove nut -Arrow- and
expose the earth wire.
30
Rep. gr.10 - Removing and installing engine
⇒ page 239
.