León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Unplug the electrical connector -2-.
– Remove bolts -arrows- and detach connection -1-.
– Loosen the hose clip -2-, remove the coolant hose.
– Remove bolts -arrows- and swivel coolant lines -1- to right.
– Unscrew bolts -arrows- and remove bracket with heat shield
-1-.
– Remove nuts -arrows- and detach turbocharger.
Installation
Installation is carried out in the reverse order. Please note the
following:
194
Rep. gr.21 - Turbocharging/supercharging
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.