Seat Leon 2013 Workshop Manual page 145

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– Unscrew bolts -arrows- and detach engine oil cooler -1-.
Installation
– Insert new O-rings.
Installation is carried out in the reverse order. Please note the
following:
– Install intake manifold
– Fill up with coolant ⇒ page 155
Specified torques
♦ ⇒ "2.1 Assembly overview - engine oil cooler", page 138
♦ ⇒ "1.1 Assembly overview - ignition system", page 268
⇒ page 229 .
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
2. Engine oil radiator
139