Timing Belt: Removing, Fitting, Tensioning - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
2.5

Timing belt: removing, fitting, tensioning

Special tools and workshop
equipment required
♦ Torque wrench - VAS
6583-
♦ counter-hold tool - T10172-
with adapter -T10172/1-
♦ Securing bolts - T10340-
♦ Counter-hold tool - T10475-
♦ Spanner - T10499-
♦ Insert tool - T10500-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Camshaft clamp - T10494-
León 2013 ➤ , León ST 2013 ➤
2. Toothed belt drive
95