Seat Leon 2013 Workshop Manual page 40

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
– On the gearbox side, ensure that the edges of the support arm
-2- and gearbox support -1- are parallel.
• Dimension -x- = dimension -x-.
– Tighten bolts for gearbox mounting.
Installation is in the reverse sequence of removal.
Specified torques
♦ ⇒ "2.1 Exploded view - assembly mountings", page 25
♦ ⇒ "2.1 Assembly overview - charge air system", page 197
♦ ⇒ Electrical system; Rep. gr. 27 ; Battery; Assembly overview
- battery
♦ ⇒ "3.1 Exploded view - air cleaner housing", page 225
♦ ⇒ "2.1 Exploded view - assembly mountings", page 25
♦ ⇒ General body repairs, exterior; Rep. gr. 63 ; Rear bumper;
Assembly overview - rear bumper cover .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
34
Rep. gr.10 - Removing and installing engine