Crankshaft Group; Cylinder Block (Pulley End); Exploded View - Poly V-Belt Drive - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
13 -

Crankshaft group

1

Cylinder block (pulley end)

⇒ "1.1 Exploded view - poly V-belt drive", page 35
⇒ "1.2 Removing and installing poly V-belts", page 38
⇒ "1.3 Removing and installing tensioner for poly V-belt",
page 40
⇒ "1.4 Removing and installing vibration damper", page 41
⇒ "1.5 Removing and installing engine support", page 42
⇒ "1.6 Crankshaft oil seal- pulley side: replace", page 46
1.1

Exploded view - poly V-belt drive

⇒ "1.1.1 Exploded view - poly V-belt drive, vehicles without air
conditioner compressor", page 35
⇒ "1.1.2 Exploded view - poly V-belt drive, vehicles with air con-
ditioner compressor", page 37
1.1.1 Exploded view - poly V-belt drive, vehicles without air conditioner compres-
sor
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
1. Cylinder block (pulley end)
35