Lubrication; Sump, Oil Pump; Exploded View - Sump/Oil Pump - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
17 –

Lubrication

1

Sump, oil pump

⇒ "1.1 Exploded view - sump/oil pump", page 126
⇒ "1.2 Engine oil", page 130
⇒ "1.3 Removing and installing sump", page 130
⇒ "1.4 Oil pump: removing and installing", page 134
⇒ "1.5 Removing and installing oil level and oil temperature send‐
er G266 ", page 137
1.1

Exploded view - sump/oil pump

Note
If large quantities of metal chips and abraded material are found during engine repair, this may indicate that
♦
the crankshaft bearings or conrod bearings are damaged. To prevent further damage, please carry out the
following steps after completion of repair work: carefully clean the oil channels; replace the oil nozzles, the
engine oil cooler and oil filter.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
Oil jets and pressure release valve
♦
respect to the correctness of information in this document. Copyright by SEAT S.A.
126
Rep. gr.17 - Lubrication
⇒ "4.5 Removing and installing oil spray jet", page 68