Seat Leon 2013 Workshop Manual page 236

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Release tool - T10527- and -T10527/1-
Removing
– Drain coolant ⇒ page 150
– Release clip -arrow- and remove coolant hose.
– Disconnect crankcase breather hose -1-.
CAUTION
The fuel system is pressurised.
Risk of injury due to fuel which may spurt out.
– Use safety goggles.
– Wear protection gloves.
– Release pressure: place clean cloth around connection and
carefully open connection.
Note
Risk of functional impairment due to soiling.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– First press hose connector -1- downwards, and then press re‐
lease tabs -arrows-.
– Pull off hose connector, keeping release tabs depressed.
– Press release tab on hose -2- for activated charcoal filter.
230
Rep. gr.24 - Mixture preparation - injection
.