Seat Leon 2013 Workshop Manual page 112

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
Fitting counter-hold tool - T10554-
• The contours of pins -1- and -2- of counter-hold tool -
T10554/1- are not distributed evenly on the bolt circle.
• They correspond to the contour of the bolt circle in the cam‐
shaft adjuster.
Note
During opening of the plug on the inlet camshaft sprocket slight
♦
oil leakage can occur
The contact points between the toothed belt and components
♦
such as camshaft pulleys, tensioning roller and idler pulley
must be free of oil.
For this reason the oil leakage point is to be covered with a
♦
cloth.
– Use counter-hold tool - T10554/1- and counter-hold tool -
T10172- to lock camshaft in position (push »anti-clockwise«).
– Loosen plug -1-, and unscrew it.
106
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.