Seat Leon 2013 Workshop Manual page 42

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
1 - Bolt
❑ renew
❑ Use counterholder -
T10475- to loosen and
tighten.
❑ 150 Nm +180°
2 - Vibration damper
❑ Removing and installing
⇒ page 41
3 - Poly-V belt:
❑ Check for wear
❑ Before removing, mark
direction of rotation with
chalk or felt-tipped pen
❑ Do not kink
❑ Routing of poly V-belt
⇒ page 38
❑ Removing and installing
⇒ page 38
❑ When installing, make
sure it is properly seated
on pulleys.
4 - Bolt
❑ 20 Nm + 90°
5 - Tensioner for poly V-belt
❑ Pivot with socket to
slacken poly V-belt
❑ Lock with locking pin -
T10060 A-
❑ Removing and installing
⇒ page 40
6 - Bolt
❑ Tightening torque ⇒ Electrical system; Rep. gr. 27 ; Alternator; Exploded view - alternator
7 - Alternator
❑ Removing and installing ⇒ Electrical system; Rep. gr. 27 ; Alternator; Removing and installing alternator
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
36
Rep. gr.13 - Crankshaft group