Exploded View - Toothed Belt - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
2.2

Exploded view - toothed belt

1 - Notched belt
❑ Before removing, mark
direction of rotation with
chalk or felt-tip pen
❑ Check for wear
❑ Removing ⇒ page 95
❑ Fitting (adjusting the
valve timing)
⇒ "2.5 Timing belt: re‐
moving, fitting, tension‐
ing", page 95
2 - Bolt
❑ 25 Nm
❑ When setting the speci‐
fied torque on the torque
wrench - VAS 6583- ,
the length indicated on
the insert tool - T10500-
must be entered in the
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
torque wrench.
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
3 - Tensioning roller
❑ Removal and installa‐
tion involve taking out
engine support
⇒ page 42
4 - Bolt
❑ renew
❑ 50 Nm + 90°
5 - Toothed belt sprocket (ex‐
haust camshaft)
❑ Removing and installing
⇒ page 89
6 - Toothed belt sprocket (inlet
camshaft)
❑ With camshaft adjuster
❑ Removing and installing camshaft adjuster
7 - Guide sleeve
8 - Bolt
❑ renew
❑ 50 Nm +135°
9 - O-ring
❑ renew
10 - Screw plug
❑ 20 Nm
11 - O-ring
❑ Captive
❑ renew
León 2013 ➤ , León ST 2013 ➤
⇒ page 104
83
2. Toothed belt drive