Seat Leon 2013 Workshop Manual page 67

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Punch - VW 207 C-
Removing
– Remove gearbox ⇒ Rep. gr. 34 ; Removing and installing
gearbox.
Prerequisites:
• Always replace needle bearing -arrow- if the engine and trans‐
mission are being separated.
• The front edges of the inner puller must not be broken.
Driving out needle bearing
– Pull needle bearing -1- out of crankshaft -2- using a standard
pulling tool e. g. Kukko - 21/2- and counter support e.g. Kukko
- 22/1- .
– The internal puller must be positioned behind the needle-and-
cage assembly -arrow-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
León 2013 ➤ , León ST 2013 ➤
61
3. Crankshaft