Removing And Installing Fuel Rail - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
❑ Replace ⇒ "2.3 Removing and installing injectors", page 212
2.2

Removing and installing fuel rail

Removing
CAUTION
The fuel system is under high pressure.
Risk of injury due to fuel which may spurt out.
– Release high pressure.
– ⇒ "1.2 Reducing fuel pressure in high-pressure section", page
208
Note
Risk of functional impairment due to soiling.
– Observe the.
⇒ "2.1 Safety precautions when working on fuel supply sys‐
tem", page 2
– Now remove the intake manifold
– Remove high-pressure pipe
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
⇒ page 229 .
⇒ page 248 .
León 2013 ➤ , León ST 2013 ➤
211
2. Injectors