Table of Contents
Advertisement
Table 7 Command output
Field
Auth.
Acct.
SessCtrl.
Request Packet
Retry Packet
Timeout Packet
Access Challenge
Account Start
Account Update
Account Stop
Terminate Request
Set Policy
Packet With Response
Packet Without Response
Access Rejects
Dropped Packet
Check Failures
Related commands
reset radius statistics
display stop-accounting-buffer (for RADIUS)
Use
display
stop-accounting requests to which no responses have been received.
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time end-time | user-name user-name }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Description
Authentication packets.
Accounting packets.
Session-control packets.
Number of request packets.
Number of retransmitted request packets.
Number of request packets timed out.
Number of access challenge packets.
Number of start-accounting packets.
Number of accounting update packets.
Number of stop-accounting packets.
Number of packets for logging off users forcibly.
Number of packets for updating user authorization information.
Number of packets for which responses were received.
Number of packets for which no responses were received.
Number of Access-Reject packets.
Number of discarded packets.
Number of packets with checksum errors.
stop-accounting-buffer
to
display
information
83
about
buffered
RADIUS
Advertisement
Table of Contents
