Mld Snooping Configuration Example; Network Requirements - HP FlexNetwork NJ5000 User Manual

Figure 226 Detailed information about an MLD snooping multicast entry
Table 88 Field description
Field
VLAN ID
Source Address
Group Address
Router Ports
Member Ports

MLD snooping configuration example

Network requirements

As shown in
acts as the MLD querier.
Perform the configuration so that Host A can receive the IPv6 multicast packets destined for the IPv6
multicast group FF1E::101.
Figure 227 Network diagram
1::1/64
GE1/0/2
Source
Description
ID of the VLAN to which the entry belongs.
Multicast source address. If no IPv6 multicast sources are specified, this
field displays ::.
Multicast group address.
All router ports.
All member ports.
Figure 227, MLDv1 runs on Router A and MLDv1 snooping runs on Switch A. Router A
GE1/0/1
1::2/64 2001::1/64
Router A
MLD querier
Host B
GE1/0/2
GE1/0/1 GE1/0/3
Switch A
224
VLAN 100
Host A
Receiver