Mld Snooping Configuration Commands; Display Mld-Snooping Group - HP 3600 v2 Series Command Reference Manual

MLD snooping configuration commands

display mld-snooping group

Syntax
display mld-snooping group [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan vlan-id: Displays the MLD snooping group information in the specified VLAN, where vlan-id is in the
range of 1 to 4094. If you do not specify a VLAN, this command displays MLD snooping group
information in all VLANs.
slot slot-number: Displays information about MLD snooping multicast groups on the specified IRF member
switch. The slot-number argument specifies the ID of an IRF member switch. The value range for the
argument depends on the number of member switches and their member IDs in the IRF fabric. If no IRF
fabric exists, the slot-number argument is the current device number.
verbose: Displays the detailed MLD snooping group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld-snooping group to display MLD snooping group information, including both dynamic
and static MLD snooping group entries.
Examples
# Display detailed MLD snooping group information in VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
253