HP E4510-48G Command Reference Manual page 61

Multicast MAX-ratio: 100%
Allow jumbo frame to pass
PVID: 100
Mdi type: auto
Link delay is 0(sec)
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 100
Port priority: 0
Peak value of input: 96132560 bytes/sec, at 2007-10-26 07:05:06
Peak value of output: 0 bytes/sec, at 2000-04-26 12:00:12
Last 300 seconds input: 6 packets/sec 678 bytes/sec
Last 300 seconds output: 1 packets/sec 179 bytes/sec
Input (total): 61745144 packets, 12152212250 bytes
0 unicasts, 47519150 broadcasts, 12121681 multicasts
Input (normal): 61745144 packets, - bytes
205227373 unicasts, 47519150 broadcasts, 12121681 multicasts
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 1395522 packets, 183608303 bytes
0 unicasts, 13 broadcasts, 1273860 multicasts, 0 pauses
Output (normal): 1395522 packets, - bytes
0 unicasts, 13 broadcasts, 1273860 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
Table 1-2 display interface command output description
Field
GigabitEthernet1/0/1 current
state
IP Packet Frame Type
Description
Unknown-speed mode
unknown-duplex mode
The Maximum Frame Length
Broadcast MAX-ratio
Unicast MAX-ratio
Current physical link state of the Ethernet port
Frame type of the Ethernet port
Description of the interface
Unknown-speed mode, in which mode speed is negotiated
between the current host and the peer.
Unknown-duplex mode, in which mode speed is negotiated
between the current host and the peer.
The maximum frame length allowed on an interface
Broadcast storm suppression ratio (the maximum ratio of
allowed number of broadcast packets to overall traffic through
an interface)
Unicast storm suppression ratio (the maximum ratio of allowed
number of unknown unicast packets to overall traffic over an
interface)
1-7
20%
17%
Description