Overflow-Replace (Igmp-Snooping View) - HP 5900 Series Command Reference Manual

The igmp-snooping max-response-time command takes effect on the current VLAN.
•
For a VLAN, the
m ax-response-time command in IGMP-snooping view.
Examples
# Set the global maximum
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-i
Related c ommands
igmp-snooping max-response-time

overflow-replace (IGMP-snooping view)

Use overflow-replace to enable the multicast group replacement feature globally.
Use undo overflow-replace to disable the multicast group replacement feature globally.
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement feature is disabled globally.
Views
IGMP-snooping v
Predefine d user roles
netw ork-admin
Paramete rs
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range
to 4094. I f you do not specify a VLAN, the command takes effect on all VLANs.
Usage gu idelines
This command takes effect only on the multicast groups that a port joins dynamically.
This command an
effective ranges:
The overflow-replace command in IGMP-snooping view takes effect on all ports.
•
The igmp-snooping overflow-replace command takes effect on the current port.
•
For a port, the igmp-snooping over
co mmand in IGMP-snooping view.
Examples
# Enable the multicast grou
<Sysname> system-view
[Sysname] igmp-snooping
igmp-snooping
response time for IGMP general queries to 5 seconds.
gmp-snooping] max-response-time 5
iew
d the igmp-snooping overflow-replace command have the same function but different
p replacement feature globally for VLAN 2.
max-response-time command takes priority over the
flow-replace command takes priority over the overflow-replace
40
for the VLAN ID is 1