Overflow-Replace (Igmp-Snooping View) - HP 6125XLG Command Reference Manual

Usage guidelines
The global configuration is effective on all VLANs, but has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global maximum response time for IGMP general queries to 5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] max-response-time 5
Related commands
igmp-snooping max-response-time

overflow-replace (IGMP-snooping view)

Use overflow-replace to enable the multicast group replacement function globally.
Use undo overflow-replace to disable the multicast group replacement function globally.
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement function is disabled globally.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
This command is effective for the multicast groups that a port joins dynamically. If you configure the port
as a static member port for a multicast group, this command is not effective for the multicast group.
The global configuration is effective on all ports, but has a lower priority than the configuration made on
a specific port.
Examples
# Enable the multicast group replacement function globally for VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] overflow-replace vlan 2
Related commands
igmp-snooping overflow-replace
25