Max-Response-Time (Igmp-Snooping View); Overflow-Replace (Igmp-Snooping View) - HP 6125G Command Reference Manual

[Sysname] mac-address multicast 0100-0001-0001 interface gigabitethernet 1/0/1 to
gigabitethernet 1/0/5 vlan 2
# Configure a static multicast MAC address entry with the MAC address of 0100-0001-0001 in interface
view of GigabitEthernet 1/0/1 in VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-address multicast 0100-0001-0001 vlan 2

max-response-time (IGMP-snooping view)

Syntax
max-response-time interval
undo max-response-time
View
IGMP-snooping view
Default level
2: System level
Parameters
interval: Specifies the maximum response delay for IGMP general queries in seconds. The value ranges
from 1 to 25.
Description
Use max-response-time to set the maximum response delay for IGMP general queries globally.
Use undo max-response-time to restore the default.
This command works only in IGMP snooping–enabled VLANs.
Related commands: igmp-snooping max-response-time and igmp-snooping query-interval.
Examples
# Set the maximum response delay for IGMP general queries globally to 5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] max-response-time 5

overflow-replace (IGMP-snooping view)

Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
View
IGMP-snooping view
Default level
2: System level
32