Igmp-Snooping Version; Last-Member-Query-Interval (Igmp-Snooping View) - HP 6125XLG Command Reference Manual

vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping static-router-port vlan 2

igmp-snooping version

Use igmp-snooping version to specify the IGMP snooping version.
Use undo igmp-snooping version to restore the default.
Syntax
igmp-snooping version version-number
undo igmp-snooping version
Default
The default setting is IGMPv2 snooping.
Views
VLAN view
Predefined user roles
network-admin
Parameters
version-number: Specifies an IGMP snooping version, 2 or 3.
Usage guidelines
You must enable IGMP snooping for a VLAN before you configure this command for the VLAN.
Examples
# Enable IGMP snooping for VLAN 2 and specify IGMPv3 snooping for the VLAN.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
Related commands
igmp-snooping enable

last-member-query-interval (IGMP-snooping view)

Use last-member-query-interval to set the IGMP last-member query interval globally.
Use undo last-member-query-interval to restore the default.
23