Xerox WorkCentre 5687 Series Service Manual page 221

01B +24V Return
Go to the appropriate component in the list that follows that has the suspect 0V supply. Check
the wiring GP 7.
• Inverter motor driver PWB, PL 10.11 Item 22.
– Flag 33, PJ45, P/J4.
– Flag 32, P/J27.
• Duplex motor driver PWB, (32-55 ppm) PL 8.22 Item 9 or (65-87 ppm) PL 8.20 Item 9.
– Flag 33, PJ91, PJ40, P/J4.
– Flag 32, P/J27.
• Toner dispense module, (32-55 ppm) PL 9.17 Item 1 or (65-87 ppm) PL 9.15 Item 1.
– Flag 34, PJ93, P/J6.
– Flag 32, P/J27.
• Output device, PL 12.10.
– Flag 35, PJ151, P/J11.
– Flag 32, P/J27.
• HVPS, PL 1.10 Item 5.
– Flag 36, PJ55, P/J14.
– Flag 32, P/J27.
• IOT PWB, PL 1.10 Item 2.
– Flag 32, P/J27.
• DADH PWB, PL 5.10 Item 5.
– Flag 38, P/J132, PJ152, P/J188.
– Flag 37, P/J25, P/J131.
• Power distribution PWB, (32-55 ppm) PL 3.20 Item 5 or (65-87 ppm) PL 3.10 Item 5.
– Flag 37, P/J25, P/J131.
• Scanner PWB
– (32-55 ppm) PL 14.25 Item 4.
Flag 39, P/J135, P/J455.
Flag 37, P/J25, P/J131.
– (65-87 ppm) PL 14.16 Item 8.
Flag 39, P/J135, P/J450.
Flag 37, P/J25, P/J131.
• Main drive PWB, part of the main drive module, (32-55 ppm) PL 4.15 Item 1 or (65-87
ppm) PL 4.10 Item 1.
– Flag 40, P/J16, P/J147.
• ROS, PL 6.10 Item 4.
– Flag 41, P/J18, PJ120.
• HCF control PWB, PL 7.20 Item 2.
– Flag 43, P/J272, PJ63, P/J394.
– Flag 42, P/J19, P/J270.
• Tray 1 and 2 control PWB, PL 7.10 Item 2.
– Flag 42, P/J19, P/J270.
• Tray 5 control PWB, PL 7.68 Item 8
– Flag 46, P/J502, P/J12, P/J 501
WorkCentre 5687 Family
August 2007
2-29
Status Indicator RAPs
01B