Viewing Additional Information; Quick Commissioning - Siemens SINAMICS V20 Operating Instructions Manual

Commissioning via the SINAMICS V20 Smart Access

6.7 Quick commissioning

6.6.5

Viewing additional information

The following window provides additional information about the SINAMICS V20 Smart
Access:
6.7 Quick commissioning
The quick commissioning function enables you to set motor parameters, connection macros,
application macros, and important parameters of the SINAMICS V20 converter.
Operating sequence
1.
2.
150
Open the quick commissioning Web page by selecting the quick commissioning icon
from either the home page or the navigation sidebar.
Proceed as follows. Quick commissioning will change the following four groups of pa-
rameters at a time.
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012