(1) Select the EPSON RC+ 7.0 menu-[Setup]-[System Configuration] to display the
(2) Select [Controller]-[Inputs / Outputs].
(3) Make sure that "Yes" is displayed in the Installed column.
14.2.4 Input Circuit
Input Voltage Range
ON Voltage
OFF Voltage
Input Current
Two types of wiring are available for use with the two-way photo coupler in the input
circuit.
RC700 / RC700-A Rev.23
[System Configuration] dialog.
The expansion I/O board is identified by the Controller software. Corresponding
Input and Output is available.
: + 12 V to 24 V ±10%
: + 10.8 V (Min.)
: + 5 V (Max.)
: 10 mA (TYP) at + 24 V input
Setup & Operation 14. Option Slots
81