7.8 DMB-LED Board
7.8.1 DMB-LED Board (RC700)
DMB-LED Board
(1) Turn OFF the Controller.
Removal
(2) Disconnect the power plug.
(RC700)
(3) Remove the Top Panel. (Mounting screw ×6)
(4) Disconnect the cables connected to the DMB-LED board.
(5) Remove the DMB-LED board. (Mounting screw ×2)
DMB-LED Board
(1) Mount the DMB-LED board. (Mounting screw ×2)
Installation
(2) Connect the cables to the DMB-LED board.
(RC700)
(3) Mount the Top Panel. (Mounting screw ×6)
(4) After connecting the power plug, turn on the Controller and check it works normally
RC700 / RC700-A Rev.23
Maintenance 7. Maintenance Parts Replacement Procedures
without vibration and abnormal sound.
163