No.
Message
Specified elements of the array
3152
variable are beyond the available
size.
3153
Parameter type mismatch.
3154
' ** ' is not an Input Bit label.
3155
' ** ' is not an Input Byte label.
3156
' ** ' is not an Input Word label.
3157
' ** ' is not an Output Bit label.
3158
' ** ' is not an Output Byte label.
3159
' ** ' is not an Output Word label.
3160
' ** ' is not a Memory Bit label.
3161
' ** ' is not a Memory Byte label.
3162
' ** ' is not a Memory Word label.
3163
Too many function arguments.
Cannot compare with Boolean
3164
value.
Cannot use Boolean value in the
3165
expression.
Cannot compare between Boolean
3166
and expression.
Cannot store Boolean value to a
3167
numeric variable.
Cannot store numeric value to a
3168
Boolean variable.
3169
Undefined I/O label was specified.
Invalid condition expression was
3170
specified.
Cannot compare between numeric
3171
value and string.
Cannot use a keyword for a
3172
variable name.
3173
' ** ' is already used for a line label.
RC700 / RC700-A Rev.23
Remedy
Limit value of the array elements
depends on the type of variables.
Refer to EPSON RC+7.0 User's
Guide "6.7.6 Array" and correct the
number of array elements so as not to
exceed the limit value.
Parameter type does not match in
Call, Force_GetForces, and Xqt
statements. Correct the parameter
type.
Specify a valid input bit label.
Specify a valid input byte label.
Specify a valid input word label.
Specify a valid output bit label.
Specify a valid output byte label.
Specify a valid output word label.
Specify a valid memory I/O bit label.
Specify a valid memory I/O byte label.
Specify a valid memory I/O word
label.
The maximum number of the function
parameter is 100. Reduce the
number of parameters.
The size of Boolean values cannot be
compared. Correct the program.
Boolean value cannot be used in the
expression. Correct the program.
The size of Boolean value and the
expression cannot be compared.
Correct the program.
Boolean value cannot be used in the
numeric variable. Correct the
program.
The numeric value cannot be used in
Boolean variable. Correct the
program.
Define a new I/O label or specify the
defined I/O label.
String expression is specified for the
right side of the condition expression
in Do or Loop statement. Correct
the condition expression so that the
right side of the expression is
Boolean value.
The numeric value and string cannot
be compared. Correct the program.
Some SPEL+ keywords cannot be
used as the variable names.
Correct the variable name not to
overlap with the keywords.
Correct the identifier ' ** ' or the line
label name.
Maintenance 9. Troubleshooting
Note 1
Note 2
215