9.2.2 When recognized under "Other devices" in Windows Device
If "EPSON Robot Controller RC170" is recognized under "Other devices" in the Windows
device manager as shown in the following dialog, delete "EPSON Robot Controller
RC170" from the device manager and connect the USB cable again to correct the problem.
(1) Select and right click "EPSON Robot Controller RC170" in the [Device Manager]
(2) Select [Uninstall].
(3) The [Confirm Device Removal] dialog appears.
(4) Remove the USB cable and connect the USB cable again. The following message
(5) When the Controller is installed automatically and the following message appears, the
If the problem is not corrected, please contact the supplier of your region.
RC700 / RC700-A Rev.23
Click the <OK> button.
appears at the right bottom of the Windows screen.
communication is available.
Maintenance 9. Troubleshooting