Download  Print this page

Epson RC700 Manual Page 169

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

(1) Install the MDB clamp 3.
MDB
Installation
(2) Insert the MDBs in the direction shown in the
NOTE
(3) Install the MDB clamp 2.
(4) Mount the MDB clamp 1.
(5) Mount the output cable of each axis of the MDBs.
NOTE
(6) Mount the Top Panel. (Mounting screw ×6)
(7) Connect the power plug. Turn ON the Controller and make sure that the Controller
RC700 / RC700-A Rev.23
Maintenance 7. Maintenance Parts Replacement Procedures
(Mounting screw ×2)
picture.
Be careful not to misplace the boards.
(Mounting screw ×2)
Set the MDB clamp so that the
grooves fit to MDBs.
(Mounting screw ×5)
When mounting the output cables, make sure that
the numbers on the MDB clamp 1 and on the
connectors are the same.
starts properly without any vibration or abnormal noise.
157

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: