Firmware Initialization Procedure - Epson RC700 Manual

Robot controller
Hide thumbs Also See for RC700:
Table of Contents

Advertisement

Maintenance 5. Firmware Update

5.4 Firmware Initialization Procedure

The firmware initialization procedure described in this section.
(1) Connect the development PC to the Controller with a USB cable (the firmware cannot
(2) Turn ON the Controller. Do not start the development software EPSON RC+ 7.0
(3) Insert the "firmware CD-ROM" in the development PC CD-ROM drive.
(4) Execute "Ctrlsetup.exe".
(5) Select the <Initialize> option button and click the <Next> button.
(6) Make sure that the development PC is connected to the Controller with a USB cable
(7) Check the version information and click the <Install> button.
136
be changed with an Ethernet connection).
until firmware initialization is complete.
and Click the <Next> button.
RC700 / RC700-A Rev.23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rc700-a

Table of Contents