Download  Print this page

I/o Connector; Input Circuit - Epson RC700 Manual

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

11. I/O Connector

The I/O connector is for connecting your input/output equipment to the system.
Refer to Setup & Operation 14.2. Expansion I/O board.
For cable wiring, refer to the Setup & Operation 3.5 Noise Countermeasures in order to
prevent noise.
Remote function is initially assigned to both input and output from 0 to 7. For further
details, refer to Setup & Operation 12. I/O Remote Settings.

11.1 Input Circuit

Input Voltage Range
ON Voltage
OFF Voltage
Input Current
Two types of wiring are available for use with the two-way photo coupler in the input
circuit.
RC700 / RC700-A Rev.23
Input
Control Unit
Output
Input
Drive Unit 1
Output
Input
Drive Unit 2
Output
Input
Drive Unit 3
Output
: +12 to 24 V ±10%
: +10.8 V (min.)
: +5 V (max.)
: 10 mA (TYP) at +24 V input
Setup & Operation 11. I/O Connector
Pins
Bit number
24
0 to 23
16
0 to 15
24
32 to 55
16
32 to 47
24
256 to 279
16
256 to 271
24
288 to 311
16
288 to 303
61

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: