2.1.2 Particular Status Display
When particular status occurs, seven-segment displays the followings.
Seven-segment
*1 When the Initialize Error occurs, reboot the Controller. If the Initialize Error is displayed
RC700 / RC700-A Rev.23
Controller startup failure *1
**
Controller startup failure
**
Controller in Recovery mode
Refer to Maintenance 4. Backup and Restore.
AC power supply drop is detected and software shut down.
Software shut down is specified from the EPSON RC+ 7.0
(software) or the Teach Pendant (option).
again after the Controller is rebooted, please contact the supplier of your region.
Safety 2. Part Names and Functions
Controller status
19