Download  Print this page

Dmb-led Board (rc700-a) - Epson RC700 Manual

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

Maintenance 7. Maintenance Parts Replacement Procedures

7.8.2 DMB-LED Board (RC700-A)

(1) Turn OFF the Controller.
DMB-LED Board
Removal
(2) Disconnect the power plug.
(RC700-A)
(3) Remove the Top Panel. (Mounting screw ×6)
(4) Remove the DMB-LED board from the front panel.
(5) Remove the ferrite core from the Support plate.
(6) Disconnect the cables connected to the DMB-LED
(7) Remove the DMB-LED board from the support plate.
(8) Remove the stud bolt from the DMB-LED board.
DMB-LED Board
(1) Mount the stud bolt to the DMB-LED board. (Stud bolt ×4)
Installation
(2) Mount the DMB-LED board to the support plate. (Nut ×2)
(RC700-A)
(3) Connect the cable to the DMB-LED board.
(4) Mount the ferrite core to the support plate. (Mounting screw ×1)
(5) Mount the DMB-LED board to the front panel. (Mounting screw ×4)
(6) Mount the Top Panel. (Mounting screw ×6)
(7) After connecting the power plug, turn on the Controller and check it works normally
164
(Mounting screw ×2)
(Mounting screw ×1)
board.
(Nut ×2)
(Stud bolt ×4)
without vibration and abnormal sound.
(7)
(7)
(5)
RC700 / RC700-A Rev.23

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: