Epson RC700 Manual page 191

No. Message
File failure.
1128
Backup information file is corrupt.
Error message failure.
1130
No item is found in the error history.
1131 Cannot access the USB memory.
File failure.
1132
Failed to copy the file.
File failure.
1133
Failed to delete the file.
File failure.
1134
GUI Builder file is corrupt.
File failure. Force Guide file is
1138
corrupt.
File failure.
1140
Failed to open the object file.
File failure.
1141
Failed to open the project file.
File failure.
1142
Failed to read the project file.
File failure.
1143 Failed to open the condition save
file.
File failure.
1144 Failed to write the condition save
file.
File failure.
1145
Failed to open the conveyor file.
File failure.
1146
Failed to read the conveyor file.
File failure.
1150
Error history is invalid.
File failure.
1151
Failed to map the error history.
File failure.
1152
Failed to open the error history file.
File failure.
1153
Failed to write the error history file.
File failure.
1155
Failed to open the settings file.
File failure.
1156
Failed to save the settings file.
File failure.
1157
Failed to read the settings file.
RC700 / RC700-A Rev.23
Remedy
The specified backup information
cannot be restored.
Acquire the backup information
again, and then restore the file.
No error history exists.
Reboot the controller.
Insert the USB memory properly.
When this error still occurs after the
USB memory is inserted properly, the
memory may be unrecognizable to
controller. Insert another memory to
check the operation.
-
-
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
1. Retry using the same USB
memory.
2. Retry using another USB
memory.
3. Retry after rebooting the
controller.
1. Retry using the same USB
memory.
2. Retry using another USB
memory.
3. Retry after rebooting the
controller.
Rebuild the project.
Rebuild the project.
1. Reboot the controller.
2. Replace the CF.
1. Reboot the controller.
2. Replace the CF.
1. Reboot the controller.
2. Replace the CF.
1. Reboot the controller.
2. Replace the CF.
Restore the controller configuration.
Restore the controller configuration.
Restore the controller configuration.
Maintenance 9. Troubleshooting
Note 1 Note 2
179