Maintenance 9. Troubleshooting
No.
Message
Force property name, status name,
or object name is not specified.
3451
Add either of a property name,
status name, or object name.
Force object name is not specified.
3452
Add a force object name.
Mass Property Object is not
3453
specified.
Specify a Mass Property Object.
Force Coordinate System Object is
not specified.
3454
Specify a Force Coordinate System
Object.
Force Control Object is not
3455
specified.
Specify a Force Control Object.
Force Monitor Object is not
3456
specified.
Specify a Force Monitor Object.
Force Trigger Object is not
3457
specified.
Specify a Force Trigger Object.
Force Control Object or Force
Coordinate System Object is not
3458
specified.
Specify a Force Control Object or
Force Coordinate System Object.
3459
Force object is not specified.
3460
Force object label is not specified.
Force object or label is not
3461
specified.
Force Coordinate System Object or
label is not specified.
3462
Specify a Force Coordinate System
Object or label.
Force Control Object or label is not
specified.
3463
Specify a Force Control Object or
label.
Force Monitor Object or label is not
specified.
3464
Specify a Force Monitor Object or
label.
Force Trigger Object or label is not
specified.
3465
Specify a Force Trigger Object or
label.
Mass Property Object or label is not
specified.
3466
Specify a Mass Property Object or
label.
230
Remedy
Either of Force property name, status
name, or object name is not specified
in FSet, FGet, MPSet, and MPGet
statements.
Add either of a property name, status
name, or object name.
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Specify a valid Mass Property object.
Specify a valid Force Coordinate
System object.
Specify a valid Force Control object.
Specify a valid Force Monitor object.
Specify a valid Force Trigger object.
Force Control data or Force
Coordinate System data is not
specified in FCSMove statement.
Specify a valid Force Control object
or Force Coordinate System object.
Specify a Force object.
Specify a Force object label.
Specify a Force object or label.
Specify a valid Force Coordinate
System object or label.
Specify a valid Force Control object
or label.
Specify a valid Force Monitor object
or label.
Specify a valid Force Trigger object
or label.
Specify a valid Mass Property object
or label.
Note 1
Note 2
RC700 / RC700-A Rev.23