Download  Print this page

Epson RC700 Manual Page 192

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

Maintenance 9. Troubleshooting
No.
Message
File failure.
1158
Failed to write the settings file.
MCD failure.
1160
Failed to open the MCD file.
MCD failure.
1161
Failed to read the MCD file.
MCD failure.
1163
Failed to save the MCD file.
MPD failure.
1165
Failed to open the MPD file.
MPD failure.
1166
Failed to read the MPD file.
MPD failure.
1168
Failed to save the MPD file.
MPL failure.
1170
Failed to open the MPL file.
PRM failure.
1181
Failed to replace the PRM file.
File failure.
1185
Failed to open the backup
information file.
File failure.
1186
Failed to read the backup
information file.
File failure.
1187
Failed to write the backup
information file.
File failure.
1188
Failed to save the backup
information file.
The backup data was created by
1189
an old version.
The backup data was created by a
1190
newer version.
There is no project in the backup
1191
data.
Cannot execute with invalid robot
1192
number.
Cannot execute with invalid robot
1193
information.
Cannot execute with invalid drive
1194
unit number.
File failure. Failed to map the
1195
health history.
File failure. Failed to open the
1196
health history file.
File failure. Failed to write the
1197
health history file.
Compile failure.
1200
Check the compile message.
Link failure.
1201
Check the link message.
180
Remedy
Restore the controller configuration.
Restore the controller configuration.
Restore the controller configuration.
Restore the controller configuration.
-
-
-
1. Reboot the controller.
2. Reinstall the firmware.
1. Reboot the controller.
2. Reconfigure the robot.
-
-
-
-
Cannot restore the controller
configuration in the specified
procedure for using old backup data.
Check the backup data.
-
-
Check that the Backup data is same
as current robot number.
Check that the Backup data is same
as current robot number.
-
Reboot the controller.
Reboot the controller.
Reboot the controller.
This error occurs during compilation
from TP. Correct where the error
occurred.
This error occurs during compilation
from TP. Correct where the error
occurred.
Note 1
Note 2
-
-
-
-
-
-
RC700 / RC700-A Rev.23

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: