Part Names And Functions - Epson RC700 Manual

Safety 2. Part Names and Functions

2. Part Names and Functions

RC700
(Left side)
(1)
RC700-A
(Left side)
(1)
(1) Controller Number label
(2) LED
(3) Seven-segment Display
(4) M/C POWER connector
(5) Fan Filter
14
(2)
(3)
(4)
(10)
(9)
(14) (15)
(2)
(3)
(4)
(10)
(9)
(14) (15)
The serial number of the Controller is indicated.
The LED indicates current operation mode
(TEST, TEACH, AUTO, or PROGRAM mode).
For details, refer to Setup & Operation 2.1 LED and Seven-segment LED.
Four-digit seven-segment LED displays the line number and the status of the
controller (error number, warning number, status of Emergency Stop and Safety
Door). For details, refer to Setup & Operation 2.1 LED and Seven-segment LED.
A connector for the Manipulator power source.
Connect the dedicated power cable attached to the Manipulator.
A protective filter is installed in front of the fan to filter out dust.
Check the condition of the filter regularly and clean it when necessary. A dirty filter
may result in malfunction of the robot system due to temperature rise of the
Controller.
(5)
(6)
(11) (12) (13)
(16) (18)(19) (20)
(17)
(5)
(6)
(11) (12) (13)
(16) (18)(19) (20)
(17)
(7)
(8)
(22)
(23)
(21)
(7)
(8)
(22)
(23)
(21)
RC700 / RC700-A Rev.23