Maintenance 9. Troubleshooting
No.
Message
Conveyor area ID was not
3295
specified.
Database file number was not
3296
specified.
Vision calibration name was not
3297
specified.
Vision object type ID was not
3298
specified.
Shutdown mode ID was not
3299
specified.
Version of linked OBJ file does not
3301
match.
Linked OBJ file does not match the
3302
compiled I/O label.
Linked OBJ file does not match the
3303
compiled user error label.
Linked OBJ file does not match the
3304
compiled compile option.
Linked OBJ file does not match the
3305
compiled link option.
Linked OBJ file does not match the
3306
compiled SPEL option.
3307
Duplicate function.
3308
Duplicate global preserve variable.
3309
Duplicate global variable.
3310
Duplicate module variable.
3311
File cannot be found.
3312
OBJ file is corrupt.
224
Remedy
Area ID that is subject to count the
queue data is not specified in
Cnv_QueLen function. Refer to
SPEL+ Language Reference
"Cnv_QueLen Function" and specify
a proper area ID.
Data base number that is subject to
operation is not specified in OpenDB,
CloseDB, DeleteDB, UpdateDB, and
SelectDB function. Refer to SPEL+
Language Reference "OpenDB
Statement" and specify a proper
database number.
Calibration name is not specified in
VCal statement. Specify a name of
calibration that is subject to calibrate.
Vision object type is not specified in
VCreateObject statement. Refer to
Vision Guide 7.0 Properties &
Results Reference "VCreateObject
Statement" and specify a proper
object type.
Shutdown mode value is not specified
in ShutDown statement and
ShutDown function. Refer to SPEL+
Language Reference "Shutdown
Statement" and specify a proper
mode value.
Not all project files are compiled in
the same version.
Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The project configuration has been
changed. Rebuild the project.
The same function name is used for
more than one file. Correct the
program (function name).
The same global preserve variable
name is used for more than one file.
Correct the program (variable name).
The same global variable name is
used for more than one file.
Correct the program (variable name).
The same module variable name is
used for more than one file.
Correct the program (variable name).
-
-
Note 1
Note 2
RC700 / RC700-A Rev.23