Restore the Controller status from the EPSON RC+ 7.0.
■ Make sure that the data used for restore was saved previously for same
■ Do not edit the backup files. Otherwise, operation of the robot system after data
restoration to the Controller is not assured.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller
(2) Click the <Restore Controller...> button to display the [Browse For Folder] dialog.
(3) Specify the folder that contains the backup data. Backup data folders are named
RC700 / RC700-A Rev.23
using the following format:
B_ RC700_ serial number_ date status was saved
→ Example: B_RC700_12345_2011-04-03_092941
Data saved to the USB memory by the Backup Controller function can also be
specified for restore.
Maintenance 4. Backup and Restore