Epson RC700 Manual page 280

Maintenance 9. Troubleshooting
No. Message
The force data label is not correct.
5940
Specify a valid force data label.
The force data label is not correct.
5941
Specify a valid force data label.
Invalid force file version.
5943
Update the controller firmware.
Failed to read the force file.
5944
Re-create the force file.
268
Remedy
Specify a valid force data label.
Refer to "Label Property" for
details.
Specify a valid force data label.
Refer to "Label Property" for
details.
Cannot load the force file
because it is a newer version.
Cannot load the force file
because the format is not
supported.
Note 1 Note 2
RC700 / RC700-A Rev.23