Download  Print this page

Input Circuit (euromap67 Board); Output Circuit (euromap67 Board) - Epson RC700 Manual

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

14.8.7 Input Circuit (EUROMAP67 Board)

Input Voltage Range
ON Voltage
OFF Voltage
Input Current

14.8.8 Output Circuit (EUROMAP67 Board)

Rated Output Voltage
Maximum Output Current : TYP 100 mA / 1 output
Output Driver
On-resistance (average)
EUROMAP67 board input/output circuit overview
 Input/output circuits do not have a built-in protection circuit to prevent short
circuits or reverse connections.
Take care to avoid wiring mistakes.
Wiring mistakes may damage board parts and prevent the robot system from
functioning properly.
 Do not use a higher than rated voltage or current.
CAUTION
Doing so may damage board parts and prevent the robot system from functioning
properly.
 Note that the I/O logic for controlling the IMM will vary depending on the molding
machine. Confirm the proper logic to use before creating programs.
RC700 / RC700-A Rev.23
Setup & Operation 14. Option Slots
: + 12 to 24 V ±10 %
: + 10.8 V (MIN.)
: + 5 V (MAX.)
: 10 mA TYP / + 24 V input
: + 12 V to 24 V ± 10 %
: PhotoMOS relay
: 23.5Ω or less
113

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: