Epson RC700 Manual page 171

(9) RC700: Remove the five connectors from the DMB.
(10) Remove the DMB mounting screws (×14).
(11) Remove the fan.
(12) Remove the DMB from the chassis.
(13) Remove the plate fixing the connectors on the front side from the DMB and the
(14) Remove the DMB-SUB board from the DMB.
RC700 / RC700-A Rev.23
Maintenance 7. Maintenance Parts Replacement Procedures
RC700-A: Remove the twelve connectors from the DMB.
Refer to Maintenance: 7.2 Fan.
At this point, be careful not to touch the chassis and other parts.
DMB-SUB boards.
(Mounting screw ×3)
RC700
RC700-A
159