Download  Print this page

Epson RC700 Manual Page 196

Robot controller.
Hide thumbs
Also See for RC700
Manual - 274 pages
Manual - 66 pages

Advertisement

Maintenance 9. Troubleshooting
No.
Message
Parser communication failure.
1586
Busy
Parser communication failure.
1587
Invalid data is detected.
Initialization failure.
1700
Failed to initialize TP.
Initialization failure.
1701
Failed to initialize TP.
Initialization failure.
1702
Failed to initialize TP.
File failure.
1703
Failed to read the screen data file.
1704
Failed to read the setting file.
1706
Failed to open the TP port.
1708
Failed to read the key table for TP.
1709
Failed to change the language.
1710
Failed to display the screen.
The controller is already connected
1800
to RC+.
The command was attempted
1802
without being connected to a
controller.
Failed to read or write the file on
1803
the PC.
Initialization failure.
1804
Failed to allocate memory on the
PC.
Connection failure.
Check the controller startup and
1805
connection of the communication
cable.
Timeout during connection via
1806
Ethernet.
Timeout during connection via
1807
USB.
1808
USB driver is not installed.
Initialization failure.
1809
Failed to initialize PC daemon.
PC daemon error.
1810
Uncommon error.
Connection failure.
The connected controller is not
1812
supported in EPSON RC+ 7.0.
Please use EPSON RC+ 5.0.
System error.
1852
Uncommon error.
Initialization failure.
1861
Failed to initialize SimulatorMNG.
Initialization failure.
1862
Failed to initialize WBProxy.
184
Remedy
-
Upgrade the firmware.
-
-
-
-
-
-
-
-
-
Only one RC+ 7.0 can be connected
to the controller.
Connect to the controller.
-
-
-
-
-
Failed to install EPSON RC+ 7.0.
Install EPSON RC+ 7.0 again.
Reboot the System.
1. Reboot the EPSON RC+7.0.
2. Reboot the PC.
Connected controller is RC180 or
RC90 compatible with EPSON RC+
5.0.
Check the connection between the
PC and controller.
1. Reboot the EPSON RC+7.0.
2. Reboot the PC.
3. Reinstall the EPSON RC+ 7.0.
1. Reboot the EPSON RC+ 7.0.
2. Reboot the PC.
3. Reinstall the EPSON RC+ 7.0.
1. Reboot the EPSON RC+ 7.0.
2. Reboot the PC.
3. Reinstall the EPSON RC+ 7.0.
Note 1
Note 2
RC700 / RC700-A Rev.23

Advertisement

Table of Contents

   Also See for Epson RC700

   Related Manuals for Epson RC700

This manual is also suitable for:

Rc700-a

Comments to this Manuals

Symbols: 0
Latest comments: