Epson RC700 Manual page 193

No. Message
User Outputs failure.
1250
The Name is empty.
User Outputs failure.
1251
The Condition is empty.
User Outputs failure.
1252 Robot number is out of the
available range.
Alarm Setting failure.
1260
Robot does not exist.
Alarm Setting failure.
1261
Failed to get the expiration date.
Alarm Setting failure.
1262
Failed to set the alarm.
Alarm Setting failure.
1263 Specified alarm number is out of
the allowable range.
Alarm Setting failure.
1264 Specified alarm number is not
enabled.
Force monitor number is out of the
1290 allowable range.
Reboot the controller.
The force monitor is already used
on another device.
1291 Close the force monitor on another
device, and then run the force
monitor.
Failed to set/load information of FG
1292
sequence and object.
1400 Force Guide file error.
1401 Invalid Force Guide file path.
1402 Failed to open Force Guide file.
1403 Do not open Force Guide file.
Invalid Force Guide sequence
1404
number.
1405 Invalid Force Guide object number.
Invalid Force Guide sequence
1406
property.
Invalid Force Guide object
1407
property.
1408 Invalid Force Guide object type.
1409 Invalid parameter.
1410 Invalid Force Guide file version.
Force Guide Incorrect property is
1411 existing.
Confirm the property.
Cannot set Decision object to top of
1412 Force Guide sequence.
Confirm Force Guide sequence.
Specified Force Guide object as
1413 ConditionObject is disabled.
Confirm the settings.
Failed to convert program.
1420
Execute rebuild.
RC700 / RC700-A Rev.23
Remedy
-
-
-
-
-
-
-
-
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
Check whether another PC is using
the force monitor.
Confirm the Force Guide property.
Cannot set Decision object to top of a
sequence.
Confirm Force Guide sequence.
Confirm the settings of Force Guide
object.
Maintenance 9. Troubleshooting
Note 1 Note 2
181