Toyota Camry Manual page 510

Hide thumbs Also See for Camry:

INSPECTION PROCEDURE

Check actuator motor.

Check harness and connector between cruise control ECU and actuator

motor. (See page IN–31)

Proceed to next circuit inspection shown on

matrix chart (See page BE–178).

However, when diag. trouble code 11, 13 is

displayed, check and replace Cruise Control

BODY ELECTRICAL SYSTEM

CRUISE CONTROL SYSTEM

1. Remove cruise control actuator.

2. Disconnect actuator connector.

1. Connect positive + lead to terminal 5 and

negative – lead to terminal 4 of actuator

connector. (Magnet clutch ON)

2. When battery positive voltage is applied to

each terminals of actuator connector, check

that the control plate moves smoothly with–

out hesitating.

Acceleration

Deceleration

3. With the motor rotating as in 2, check that

the motor is stopped by limit switches when

the control plate moves to fully opened or

fully closed position.

Replace actuator assembly.

Repair or replace harness or connector.