Toyota Camry Manual page 422

BODY ELECTRICAL SYSTEM
SLIDING ROOF SWITCH INSPECTION
INSPECT SLIDING ROOF SWITCH
Continuity
Inspect the switch continuity between terminals.
Switch position
SLIDE OPEN
SLIDE OFF
SLIDE CLOSE
TILT DOWN
TILT OFF
TILT UP
If continuity is not as specified, replace the switch.
SLIDING ROOF MOTOR INSPECTION
INSPECT SLIDING ROOF MOTOR
Motor Operation
(a) Connect the positive (+) lead from the battery to
terminal 3 and the negative (–) lead to terminal 1,
check that the motor turns to counterclockwise
(moves of the close side).
(b). Reverse the polarity, check that the motor turns to
clockwise (moves to the open side).
If operation is not as specified, replace the motor.
Circuit Breaker operation
(a) With the sliding roof in the fully opened position, hold
the sliding roof switch in "OPEN" position and check
that there is a circuit breaker operation noise within
10 to 60 seconds.
– SLIDING ROOF SYSTEM
Tester connection to
terminal number
3–4
4–6
2–4
4–5
BE–103
Specified value
Continuity
No continuity
Continuity
Continuity
No continuity
Continuity