Toyota Camry Manual page 225

AX2–38
AUTOMATIC TRANSAXLE –
7. INSTALL FRONT FRAME ASSEMBLY
(a) Hold the front frame assembly.
(b) Install the6 bolts and 4 nuts.
(c) Torque the bolts and nuts.
19 mm head bolt
Torque: 1$1 N–m (1,850 kgf–cm, 134 ft–lbf)
12 mm head bolt
Torque: 32 N–m (330 kgf–cm, 24 ft–lbf)
Nut
Torque: 36 N–m (370 kgf–cm, 27 ft–lbf)
(d) Install the 2 set screws in the right and left fender
liners.
8. INSTALL STEERING GEAR HOUSING
(a) Install the steering gear housing to the front frame
assembly.
(b) Install and torque the 2 bolts and nuts.
Torque: 181 N–m (1,850 kgf–cm, 134 ft–lbf)
(c) Connect the stabilizer bar bushing bracket with the 4
bolts.
Torque: 19 N–m (195 kgf–cm, 14 ft–lbf)
ASSEMBLY REMOVAL AND INSTALLATION