Toyota Camry Manual page 252

AUTOMATIC TRANSAXLE –
(d) Check kick–down operation
While running in the D position, 2nd, 3rd and 0/D
gears, check to see that the possible kick–down
vehicle speed limits for 2!1, 3!2 and 0/D!3
kick–downs conform to those indicated on the auto–
matic shift schedule. (See page AX2–67)
(e) Check abnormal shock and slip at kick–down.
(f) Check the lock–up mechanism.
(1) Drive in D position, O/D gear, at a steady speed
(lock–up ON) of about 70 km/h (43 mph).
(2) Lightly depress the accelerator pedal and check
that the engine RPM does not change abruptly.
If there is a big jump in engine RPM, there is no
lock–up.
2. 2 POSITION TEST
Shift into the 2 position and fully depress the acceler–
ator pedal and check the following points:
(a) Check up–shift operation.
Check to see that the 1–)2 up–shift takes place and
that the shift point conforms to the automatic shift
schedule.(See page AX2–67)
HINT: There is no 0/D up–shift and lock–up in the 2
position.
(b) Check engine braking.
While running in the 2 position and 2nd gear, release
the accelerator pedal and check the engine braking
effect.
(c) Check for abnormal noises during acceleration and
deceleration, and for shock at up–shift and down–
shift.
TROUBLESHOOTING
AX2–65