Toyota Camry Manual page 632

BODY – WINDSHIELD
14. INSPECT FOR LEAKS AND REPAIR
(a) Perform a leak test after the hardening time has ela–
psed.
(b) Seal any leak with auto glass sealer.
Part No. 08833–00030
15. INSTALL WINDSHIELD UPPER MOULDING
(a) Place the moulding onto the body.
(b) Tap the moulding with your hand to fasten the clips at
the glass edge.
At the same time, install the fastener, by tapping them
by hand.
16. INSTALL WINDSHIELD OUTSIDE MOULDING
17. INSTALL WEATHERSTRIP
18. INSTALL FOLLOWING PARTS:
(a) Cowl louver
(b) Wiper arms
(c) Hood
(d) Front pillar garnish
(e) Interior light
(f) Front assist grip
(g) Sunvisors and holders
(h) Inner rear view mirror
BO–81